All Concrete Inspection

Test hammers are used to determine the surface hardness of concrete and are one of the most widely used instruments to assess concrete compressive strength. It is the quickest, simplest and least expensive method to obtain an estimate of the quality and strength of the concrete.
When corrosion occurs to rebar or steel structures within concrete the ferric oxide protective layer surrounding the concrete breaks down allowing an electrochemical reaction between the steel and the concrete. Half-cell meters accurately measure the condition and potentiial corrosion of rebars and steel structures wtihin concrete.
A rebar locator is used to determine the presence and orientation of steel reinforcement rebars under the surface of the concrete. A contractor engaged in maintenance work will be familiar with the problem of accurately locating the exact position of rebar, wall ties, studs and other metal fasteners. These low cost, simple to use gauges can meet their everyday requirements.
Many concrete structures have a protective or cosmetic coating. Premature failure of this coating can, at the very least, result in additional costs of rework. Adhesion tests verify that both surface preparation and coating application are within specification.
Concrete structures are porous and will absorb moisture, our range of moisture meters and climate monitoring gauges allows moisture content to be measured.
The range also includes gauges used for the measurement of crack width in concrete and other structures.

All Concrete Inspection

Test hammers are used to determine the surface hardness of concrete and are one of the most widely used instruments to assess concrete compressive strength. It is the quickest, simplest and least expensive method to obtain an estimate of the quality and strength of the concrete.
When corrosion occurs to rebar or steel structures within concrete the ferric oxide protective layer surrounding the concrete breaks down allowing an electrochemical reaction between the steel and the concrete. Half-cell meters accurately measure the condition and potentiial corrosion of rebars and steel structures wtihin concrete.
A rebar locator is used to determine the presence and orientation of steel reinforcement rebars under the surface of the concrete. A contractor engaged in maintenance work will be familiar with the problem of accurately locating the exact position of rebar, wall ties, studs and other metal fasteners. These low cost, simple to use gauges can meet their everyday requirements.
Many concrete structures have a protective or cosmetic coating. Premature failure of this coating can, at the very least, result in additional costs of rework. Adhesion tests verify that both surface preparation and coating application are within specification.
Concrete structures are porous and will absorb moisture, our range of moisture meters and climate monitoring gauges allows moisture content to be measured.
The range also includes gauges used for the measurement of crack width in concrete and other structures.

+44 (0)161 371 6004